FGQ steel Cutter 

 Rebar Cutter FGQ 
 The Division cut off production of steel is mainly used to split the mining metallurgy, petroleum, steel bridges and other engineering departments cut. The machine uses split structure, small size, light weight, easy to operate, flexible, cutting force, in particular, is more appropriate for underground work. 
 FGQ steel cutting device parts compact, high-quality materials with the most advanced technology for processing. Is currently the best steel cutting tools. 
 Maximum cutting diameter cutting force model of work pressure on the handle operating force 
 FGQ-16 Φ6-16 10T 56MPa ≤ 45Kg 
 FGQ-20 Φ8-20 15T 56MPa ≤ 45Kg 
 FGQ-25 Φ16-25 25T 56MPa ≤ 45Kg 
 FGQ - 34 Φ20-34 45T 56MPa ≤ 45Kg 
 FGQ steel cutting uses and precautions 
 1 This series of products for cutting Φ6-34 and other garden variety of steel metal material. When used according to the diameter of the adjustment bolt steel, the steel bars placed at right angles with the head position. 
 (2) use hand pump when the first rapid docking connector and the host cylinder, the oil pump on the oil discharge screw tightened to work. Similarly, when the work is completed will screw up the oil to relax, work cylinder will automatically retract. 
 3 prior to use air travel back to some work, ministries action to be flexible, no leakage before use. 
 4 used where there is space to fight the phenomenon, can be relaxed on the oil discharge screw pump, to pump air down vertically up and play a few first, and then tighten the drain screw, you can continue to use. 5 in a load, do not remove the quick connector, to avoid accidents and damage to the parts 
 6 Check the oil: If the fuel shortage on the performance of the machine can not play big. Part of the big moves are poor and other abnormal conditions arising from insufficient oil. 
 7 fuel tank anti-wear hydraulic oil with 32 # or 10 # transformer oil. Remove the fuel pump when the tail of the rubber protective cover, and then spin off the road a 8mm socket head cap screw pipe to fuel, but oil should slow, and to shake the handle to the exhaust, tubing no longer take the air bubbles to fill. 
 8 cut, the knife blade between the material does not allow head left. Otherwise the knife head blocked the body damage. 
 9. Hard and tough steel must calculate the maximum cutting force, and pay attention to the short flying head injury material, good security measures. 
 10 on both sides of the blade can be used to replace worn spare blades. 
 11 Long-term unused, should be stored in dry and no corrosive gas environment 
 FJQ Split Rope Cutter 
 Wire Rope Cutter, split cut off the rope, hydraulic wire rope Cutter, FJQ split rope Cutter 
 FJQ-32 / discrete wire Cutter, FJQ-52 / discrete wire Cutter, FJQ-32 / Split Wire Rope Cutter, FJQ-32 / Split Wire Rope Cutter 
 FJQ split mainly by the wire rope off the power source (with electric and manual pumps are available), the work cylinder, slide and cutting blades, and other major part of the composition, FJQ Wire Rope Cutter split it with a reasonable structure, easy operation, cut off quickly, effort, etc., especially as use of split structure, which essentially avoid the previous careless operation of the rope thrown bomb wounding phenomenon. FJQ Wire Rope Cutter not only split off ￠ 32-52 mm rope, but also cut off the ￠ 20 mm below the specifications of the round bar. FJQ Split Rope Cutter is a national initiative, widely used in metallurgy, mining, oil, bridges and other engineering departments. 
 Split Wire Rope Cutter FJQ use: 
 1, the fuel tanks and pumps connected to high-pressure hose and tighten the bolt back to oil. 
 2, the active marketing aside, turn the slide, and then cut the rope into the slot until the (direct penetration), having a good sales activity. 
 3, moving up and down the press handle, the blade forward, cutting action can be realized. 
 4, the forward movement of the finished, loosen the bolt back to the oil, so that knife return, ready for the next action. 

 Model cutting blade stroke range maximum rated working pressure cutting force operating force Dimension handle 
 FJQ32 ￠ 832mm 40mm 16T 63MPa ≤ 35KN 600 * 230 * 120mm 
 FJQ-52 ￠ 8-52mm 58mm 50T 63MPa ≤ 38KN 600 * 230 * 120mm 
 Phone: 0537-2165458 
 Fax: 0537--2530678 
 Mobile: 15069731211 
 QQ: 1399893937 
 Manager: Zhang Song 
 Website: www.bafangjixie.com 
 E-mail: 1399893937@qq.com